Industrial Series 30 Carrier

Standard Equipment
. Body
- 1/4 smooth floor plate (steel floor)
- 5 x 2 structural tube crossmembers on 8 inch centers
- Floor level sides with stake pockets
- Heavy duty approach plate with 4 chain lock

. Full length subframe
. Fixed position stabilizer
. Illuminated dual controls
. 15,000 lb. hydraulic winch with 9/16 x 100 ft. cable
. Body lock
. Mudflaps
. Federal standard 108 shock mounted lighting
. Four side marker lights
. Water resistant junction box for wire harness connection
. Lubrication fittings on all pivot points


Optional Equipment

. 3/16 or 1/4 diamond tread floor
. 5/4 Apitong (wood floor)
. Steel floor overlay on wood (not recommended)
. Additional chain locks
. Hydraulic rear stabilizer
. 20,000 lb. hydraulic winch with 5/8 x 100 ft. cable
. 30,000 lb. hydraulic winch with 11/16 x 100 ft. cable
. 8 cu. ft. water resistant aluminum tool box
. 4 cu. ft. aluminum tool box
. Factory installation
. Direct mount pump/PTO


Specifications

Body Width

96 O.D. - 102 O.D.

Body Extension

120 inches

Control Valve

Sectional, 20 GPM, 2000 PSI

Oil Reservoir

26 gallons

Oil Filter

250 PSI, 30 GPM, 10 Microns

Pump

18 or 28 GPM

Body Rating*

30,000 lbs. evenly distributed

Minimum Load Angle**

14 degrees at 42 inch frame height


* Load ratings are based on structural factors - not chassis capability.
** Load angle varies with frame height and body length. Lower frames and longer bodies will produce lower load angles.