Heavy Duty Series 16

Standard Equipment
. Aluminum or Steel Body

. Aluminum Body:
- High tensile double-box extruded floor system
- Heavy duty extruded sill with integral full length graphite-impregnated wear strips top and bottom
- Front left and right chain trays
- 9 inch extruded double-box sides
- Front and rear sill reinforcements
- Heavy duty approach plate
- 6 chain locks
- Smooth floor

. Steel Body:
- Front left and right chain trays
- 3/16 smooth floor or 3/16 diamond tread
- 4 x 2 structural tube crossmembers 12 inches on center
- Heavy duty approach plate with four chain locks
- Raised reinforced steel side
- 6 chain locks

. Full length reinforced rail subframe
. Fully hydraulic hitch or wheel lift
. Illuminated dual controls
. Body lock
. Four side body marker lights
. Federal standard 108 shock mounted lighting
. Tow light plug
. Water resistant junction box for wire harness connection
. Lubrication fittings on all pivot points
. 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
. Pilot operated holding valves on tilting and lifting functions
. Mechanical anti-tilt
. Backup alarm
. Winch free-wheel extension handle
. Cable tensioner
. Cable roller guide
. Safety chains


Optional Equipment
. Aluminum or Steel Body:
- Additional chain locks
- All steel or aluminum trimmed cab protectors
- Hydraulic planetary winch - 9,000 or 12,000 lbs.
- 8 cu. ft. water resistant aluminum tool box with shelf
- 4 cu. ft. aluminum tool box with shelf
- Factory installation
- Direct mount pump/PTO
- BackSaver wheel lift
- Mudflaps
- Hydraulic rear stabilizer

. Steel Body Only:
- 1/4 smooth or deck plate
- 5/4 Apitong wood floor
- Floor level sides with stake pockets
- Floor level sides with outer rub rail
- Open rail sides
- Open rail removable sides
- 4 x 2 structural tube crossmembers - 8 inches on center
- 102 inch wide body


Specifications

Aluminum Body Width

92 I.D. - 96-3/4 O.D.

Steel Body Width

92 I.D. - 98-1/4 O.D.

Body Extension

117inches

Hitch Reach

41 inches

Wheel Lift Reach

63 inches

Control Valve

Sectional, 20 GPM, 1700 PSI

Oil Reservoir

12 gallons

Oil Filter

250 PSI, 25 GPM, 10 Microns

Pump

18 or 28 GPM

Body Rating*

16,000 lbs. evenly distributed

Hitch Rating*

3,500 lbs. extended

Wheel Lift Rating*

4,000 lbs. extended

Minimum Load Angle**

13° at 36 inch frame height

* Load ratings are based on structural factors - not chassis capability.
** Load angle varies with frame height. Lower frames will   
produce lower load angles.