Medium Duty Wrecker Model 1014

Standard Equipment

. Aluminum modular body sides with two tool compartments each side

. Releasable L-arms

. Aluminum 28 in. tunnel through box with tool compartment  lights

. Wheel straps and ratchets

. Tool compartment door closures on all doors

. Tandem pump group

. 108 inch CA or 120 inch CA (must specify)

. Safety chain pockets

. 12,000 lb. Planetary winches

. Safety Chains

. 7/16 x 150 ft. cable

. Slanted light pylon

. Cable tensioners

. Electric wire remote control for underlift

. 2 inch forks

. FMVSS 108 lighting

. 3 inch forks

. Junction box with wire harness

. 4 inch forks

. Pilot operated holding valves

. Spring shackle adapters

. Lubrication fittings on all pivot points

. Low profile fork holders

. Dual rear controls

. Elevated fork holders

. Rear D-rings

. Backup alarm

. Tow light plug

Optional Features

. 15,000 lb. Planetary winches with air free spool release

. Mudflaps

. Medium duty truck bar with chains

. Glad Hand and seven pin connector

. J-hook chains

. Bar light

. PTO

. Work lights

. Trailer hitch adapter

. Switch panel

. Magnetic tow lights

Specifications

Body Width

96 inches

Boom elevation

35 degrees

Boom reach past tailboard

90 inches

Underlift reach to center of fork

72 inches

Power tilt range

+ 8 degrees and - 7 degrees

Control valve-boom

Sectional, 20 GPM, 2000 PSI

Control valve-underlift

Sectional, 12 GPM, 2000 PSI

Oil Reservoir

20 gallons

Oil filter (2)

12 GPM, 10 Microns

Tandem Pump

15 GPM each port