Series 10 Carrier

Standard Equipment

. Aluminum or Steel Body
. Aluminum Body:
- Heavy duty extruded sill with integral full length graphite-impregnated wear strips top and bottom
- Front left and right chain trays
- Extruded double-box sides
- Rear sill reinforcements
- 6 chain locks
. Steel Body:
- 3/16 smooth floor
- front left and right chain trays
- 4 x 2 structural tube crossmembers 12 inches on center
- raised steel sides
- 6 chain locks
- black paint or prime

. Inboard or outboard titlt cylinders
. Fully hydraulic hitch or wheel lift
. Illuminated dual controls
. Body lock
. Mudflaps
. Federal standard 108 lighting
. Tow light plug
. Water resistant junction box for wire harness connection
. Lubrication fittings on all pivot points
. 8,000 lb. hydraulic winch with 3/8 x 50 ft. cable
. Pilot operated holding valves on tilting and lifting functions
. Back up alarm
. Cab protector with aluminum trim
. Aluminum tool box (33L x 18H x 18W)
. Direct mount pump
. Cable roller guide
. Winch free wheel extension
. Releasable L-arms
. Safety Chains
. Mechanical anti-tilt


Optional Equipment

. Stationary cab protector kit
. Aluminum tool box (49L x 16H x 18D)
. Factory installation
. PTO
. Engine mount clutch pump
. Steel body paint (other than black)
. Additional chain locks (steel only)
. 102 inch wide body - (steel only)
. 3/16 in. diamond plate floor (steel only)
. AutoGrip IIT wheel lift
. BackSaverT wheel lift
. Removable side rails
. Floor level sides with stake pockets
. Floor level sides with rub rails
. 9,000 lb. planetary winch


Specifications

Aluminum Body Width

96-3/4 O.D. - 92 I.D.

Steel Body Width

98 O.D. - 92 I.D.

Body Extension

111 inches

Control Valve

Sectional, 20 GPM, 1700 PSI

Oil Reservoir

12 gallons

Oil Filter

250 PSI, 25 GPM, 10 Microns

Pump

18 GPM

Body Rating*

10,000 lbs. evenly distributed

Hitch Rating*

2,500 lbs. extended

Wheel Lift Rating*

3,000 lbs. extended

** Load ratings are based on structural factors - not chassis capability.